+ Reply to Thread
Results 1 to 2 of 2

Thread: How to Switch between VLANS

  1. #1
    Junior Member
    Join Date
    Jan 2012
    Posts
    10

    How to Switch between VLANS

    I got 2 VLANs , how to switch between VLANs ? , i got VLAN 10 & VLAN 11
    Thanks in advance.

  2. #2
    Junior Member
    Join Date
    Feb 2012
    Posts
    19
    Here are the Steps :
    ***************
    1- create the network
    2- do the connection (wires)
    3- configure the trunk port [i.e each int that connects switchs together give it : switchport mode trunk]
    4- in each switch , set all interfaces except for the trunk ones to ACCESS mode for security of vlans database
    5- configure VTP [name,password and mode(server or client or transparent)] and you must configure the VTP
    also set one switch to Server and the others to client because when configure vtp you add vlans on a switch
    and then all other switches adds it automatically
    VTP Creation :
    on the server switch type
    config t > vtp domain (name) <<-- here you are created a vtp domain
    6- to create a vlan just go to config mode then type vlan (number) then enter , the vlan will be created
    7- give the vlans name after creating : type name (THE_NAME)

    ************************************************** ************************************************** ************
    VLAN-SWITCHING Configuring :
    ****************************
    1) Configure TRUNK
    ---------------
    a) Define the Interfaces that connects the switches together and set them to trunk
    ------------------------------------------------------------------------------
    If switch is old and does not support ISL
    Code:
          Switch(config)#int fa0/1
          Switch(config-if)#switchport mode trunk
    If switch supports ISL & 802.1Q :
    Code:
          Switch(config)#int fa0/1
          Switch(config-if)#switchport trunk encapsulation dot1q
          Switch(config-if)#switchport mode trunk

    b) Set rest of the interfaces to access mode
    ----------------------------------------
    Code:
          Switch(config)#int range fa0/2 - 24
          Switch(config-if)#switchport mode access
    2) Configure VTP
    -------------
    a) Set one Swtich to server and rest to client for more security:
    Code:
          Switch(config)#vtp mode server
    OR
    Code:
          Switch(config)#vtp mode client
    b) Give it a domain name:
    Code:
          Switch(config)#vtp domain XXXXXX

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts