+ Reply to Thread
Results 1 to 2 of 2

Thread: i need help configuring rip on my router

  1. #1
    Junior Member
    Join Date
    Feb 2012
    Posts
    19

    i need help configuring rip on my router

    The company i am working on has gone bigger and bought more than 3 routers , so i`ll have to move from Static routing to dynamic routing , i just need to know how to configure the RIP on my routers so they can pass the Routing table to each other

  2. #2
    Junior Member
    Join Date
    Feb 2012
    Posts
    10
    To configure RIP on your network , then you have to tell the router what networks to advertise and where to advertise it .
    So for example check that network Digram below :

    Code:
    (192.168.1.2)PC2------------Switch------------Router1................Router2------------Swtich---------PC2(192.168.3.2)
    Internal Network of router1 has an ip address of : 192.168.1.0
    Network between Router1 and Router 2 has an ip address of : 192.168.2.0
    Internal Network of router2 has an ip address of : 192.168.3.0

    Router 1 :
    Code:
    Router1(config)#router rip
    Router1(config-if)#version2
    Router1(config-if)#network 192.168.1.0
    Router1(config-if)#network 192.168.2.0
    Router 2 :
    Code:
    Router2(config)#router rip
    Router2(config-if)#version2
    Router1(config-if)#network 192.168.2.0
    Router1(config-if)#network 192.168.3.0
    Last edited by matrix; 03-19-2012 at 11:13 PM.

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts