+ Reply to Thread
Results 1 to 2 of 2

Thread: CCNA : Connect 2 remote networks with each other

  1. #1

    CCNA : Connect 2 remote networks with each other

    I am studying CCNA At the moment and i want to understand the concept of connecting two remote networks with each other , lets say we have two networks one in USA and one in Paris , USA IP : 10.0.0.0 and Paris IP : 11.0.0.0
    How to configure the both routers ?

  2. #2
    Okay , lets say Network USA and Paris each has 4 computers connected to it with a switch , so each network should have 1 router , 1 switch and 4 computers .
    To connect two remote networks with each other you need a serial connection .
    Before starting you must understand that for every router interface there is a different network.

    Network USA (10.0.0.0) :[-- Configure the Router Interfaces --]
    -- Configure Local Network --
    Code:
    Router(config)#int fa0/0
    Router(config-if)#ip address 10.0.0.4 255.0.0.0
    Router(config-if)#duplex auto
    Router(config-if)#speed auto
    -- Configure the other Interface [Remote Interface] --
    Code:
    Router(config)#int se0/1/0
    Router(config-if)#ip address 50.0.0.1 255.0.0.0
    Router(config-if)#clock rate 64000
    -- Each packet has an ip of 11.X.X.X must pass through serial interface to go to remote network --
    Code:
    Router(config)#ip route 11.0.0.0 255.0.0.0 Serial0/1/0
    Network Paris (11.0.0.0) :[-- Configure the Router Interfaces --]
    -- Configure Local Network --
    Code:
    Router(config)#int fa0/0
    Router(config-if)#ip address 11.0.0.4 255.0.0.0
    Router(config-if)#duplex auto
    Router(config-if)#speed auto
    -- Configure the other Interface [Remote Interface] --
    Code:
    Router(config)#int se0/1/0
    Router(config-if)#ip address 50.0.0.2 255.0.0.0
    -- Each packet has an ip of 11.X.X.X must pass through serial interface to go to remote network --
    Code:
    Router(config)#ip route 10.0.0.0 255.0.0.0 Serial0/1/0

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts